Helmet for ULTRALIGHT Gyrocopter Paramotor with ANR Headset and general Aviation Jacks, push to talk on earcup, anti-reflection visor.
Helmet + ANR headset
This is a FULL SPectrum II Base without headband
ATTENTION
Our last delivery arrived with Apple Green earpieces and not Aviation Green.
The product photos on this page do not show the product in the colour in which it will be delivered to you, our photos are not contractual. We ask you to take good note of it.
Overview
- ANR Aviation Headset (ANR power: 2 batteries 1,5 v)
- Kenwood Plug
- Super Soft Double Foam Head Pad
- Noise-canceling electret Microphone
- Precision mono rail boom for perfect microphone placement
- Easy-to-wear super soft silicone double gel ear seals
- Size Adjustment possible
- PTT on earcup
- Straight cord from headset to molded plug, 150CM
- Assembled strictly following the FAA TSO standards
Headset Color: green
Helmet Color : Electric Red
Noise Reduction Ratings (NRR):24dB with ANR 41dB
Specifications
Headphone
Type: Dynamic (F30)
Frequency Response:50 Hz to 20 kHz
Sensitivity:95+/-5 dB SPL (1 kHz, 1 mW input per earcup side) full volume on ear simulator
Active Noise Attenuation:
- Dynamic 42 ohms:
- Rate Input: 30mW
- Max.Input:100mW
Speech Sound:
- Dynamic 300 ohms:
- Rate Input: 30mW
- Max.Input:100mW
Microphone and Amplifier:
- Element Type: Noise-canceling electret
- Frequency Response:100Hz to 5 kHz
- Operating Voltage (supplied by aircraft ):8-32 Volts DC
- Matching Impedance: 150-1000 ohms
- Sensitivity:-33+/-4 dB
(ref: 0dB SPL=20.0uPa at 1 kHz with 10 Vdc 150 ohms AC load)
General
- Operating Temperature: -20 to 70°C
- Cordage: Straight cord from headset to molded plug, 150CM
Intercom Connections Plug:
- Earphone Plug: PJ-055( .25"F6.3 phone plug)
- Microphone Plug:PJ-068( .206"F5.2 phone plug)
- Weights: 600g
Noise Reduction Specifications:
- Attenuation Frequency Band : 20Hz~20KHz
Main Attenuation Frequency Band : 20Hz~60-0Hz
- Attenuation Capability : 18~21dB
- Power Consumption : 30 mW
- Headset size range Height : 10 to 14 cm
- Color: Green
- Boom: Mono Hand Boom
Notice:
ON/OFF Version
First insert 2 AA batteries in the correct direction.
If your device has a small switch labeled MONO/STEREO in the battery compartment, set this switch to the MONO position.
1. When the ON/OFF switch on the side of the device is turned on, the ANR function begins to operate.
2. When the battery is low, the red LED indicator flashes. Active Noise Reduction (ANR) will stop working after about an hour. The headset will continue to function in passive mode.
3. When you put on this headset and want to turn it on, wait at least 10 seconds for the ANR to stabilize after analysis.
( Data translated from the Manufacturer's Documentation)